The Dell™ Studio Hybrid comes with a wireless radio frequency (RF) mouse and keyboard (Figure 1). They are effective out to ~9m (27-30 feet) and use AA alkaline batteries. The keyboard is a hybrid of traditional desktop and laptop keyboard features. The keyboard has a desktop layout, 3x2 edit key configuration, multimedia keys, number keypad, and scroll wheel. The wireless keyboard and mouse come pre-synchronized and will work out-of-the-box.

Figure 1: The Studio Hybrid with Wireless RF Mouse and Keyboard

To resync the wireless mouse and keyboard on the Studio Hybrid system, perform the following steps:

1. Turn the computer on.

2. Turn on the keyboard and mouse.

3. Press the sync button to the rear of the computer (Figure 1).

4. Press the sync button on the keyboard.

5. Press the sync button to the rear of the computer again.

6. Press the sync button on the mouse.

   
   Figure 1: The Sync Button Locations on the Dell Studio Hybrid System, Keyboard, and Mouse

1. Slide the keyboard battery cover away from the keyboard (Figure 1).

   
   Figure 1: Battery Cover on the RF Wireless Keyboard

2. Slide the AA batteries into the compartment as stamped onto the inside of the battery compartment.

3. Place the battery cover back into its original position and turn the keyboard on.

1. Press and hold the power button on the bottom of the mouse until the power LED turns off.

2. Slide the mouse cover release latch on the bottom of the battery until the cover pops open, then slide the cover away from the mouse (Figure 1).

   
   Figure 1: Removing the Battery Cover on the RF Wireless Mouse

3. Slide the AA batteries into the compartment as stamped onto the inside of the battery compartment.

4. Place the battery cover back into its original position and turn the mouse on.