When Broadcom Network Interface Card (NIC)s are Smart Load Balance (SLB) teamed with Livelink enabled and the Broadcom driver release is prior to version T4.1.
The other systems on the network may report duplicate Internet Protocol (IP) addresses. It happens due to the Broadcom teamed NICs sending Address Resolution Protocol (ARP)s with an invalid origination IP address.

	Note:
	This issue is not present if Livelink is disabled or SLB teaming is not utilized.

Do not replace any hardware or reinstall software.

Upgrade to Broadcom release T4.1 or later to resolve this issue.