Red dot denotes pin 1.
A, pins 1-3
(password) |
 (default) |
Password features are
enabled. |
| |
 |
Password features are
cleared at the next system boot. |
A, pins 4-6
(clear CMOS) |
 (default) |
System setup settings are
retained at next system boot. |
 |
System setup settings are
cleared at next system boot. After clearing CMOS
settings, turn off power and set the jumper back to pins
4-5 (default settings are used at start-up). |
B, pins 1-3
(setup access) |
 (default) |
Allows user to enter system setup
program. |
 |
Prevents user from entering system setup
program. |
B, pins 4-6
(reserved) |
 (default) |
No jumper installed. Do not change. |
C, D
(CPU speed) |
 |
Microprocessor's internal speed is 166
MHz. |
 |
Microprocessor's internal speed is 200
MHz. |
|
Microprocessor's internal speed is 233
MHz. |
= pins 1-2 jumpered
= pins 2-3 jumpered