Back to Contents Page

Replacing the Computer Cover

Dell™ Dimension™ 3100/E310 Service Manual

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

1. Ensure that all cables are connected and fold cables out of the way.
   
   

Gently pull the power cables toward you so that they do not get caught underneath the drives.

2. Ensure that no tools or extra parts are left inside the computer.
   
   
3. Align the bottom of the cover with the tabs located along the bottom edge of the computer.
   
   

4. Using the tabs as leverage, rotate the cover downward and close.
   
   
5. Snap the cover into place by pulling back on the cover latch release, and then releasing the latch release when the cover is seated.
   
   
6. Ensure that the cover is seated correctly before moving it to the upright position.
   
   

NOTICE: To connect a network cable, first plug the cable into the network device and then plug the cable into the computer.

7. Connect your computer and devices to electrical outlets, and turn them on.
   
   

Back to Contents Page