Conventions: Dell™ Dimension™ C System Reference
The following subsections describe notational conventions used in
this document.
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold
type or in italic type. These blocks are notes, notices, and cautions, and they are used
as follows:
 |
NOTE: A NOTE indicates important information that helps you
make better use of your computer system. |
NOTICE: A NOTICE indicates either potential damage to
hardware or loss of data and tells you how to avoid the problem.
 |
CAUTION: A CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in minor or moderate injury. |
The following list defines (where appropriate) and illustrates typographical
conventions used as visual cues for specific elements of text throughout this document:
- Interface components are window titles, button and icon names, menu names and
selections, and other options that appear on the monitor screen or display. They are
presented in bold.
Example: Click OK.
- Keycaps are labels that appear on the keys on a keyboard. They are enclosed in
angle brackets.
Example: <Enter>
- Key combinations are series of keys to be pressed simultaneously (unless
otherwise indicated) to perform a single function.
Example: <Ctrl><Alt><Enter>
- Commands presented in lowercase bold are for reference purposes only and are
not intended to be typed when referenced.
Example: “Use the format command to . . . .”
In contrast, commands presented in the Courier New font are part of an instruction and
intended to be typed.
Example: “Type format a: to format the diskette in
drive A.”
- Filenames and directory names are presented in lowercase bold.
Examples: autoexec.bat and c:\windows
- Screen text is a message or text that you are instructed to type as part of a
command (referred to as a command line). Screen text is presented in the Courier New font.
Example: The following message appears on your screen:
No boot device available
Example: “Type md c:\programs and press
<Enter>.”
- Variables are placeholders for which you substitute a value. They are presented
in italics.
Example: DIMM_x (where x represents the DIMM
socket designation)
