System Battery Removal: Dell Precision WorkStation 210 Systems
System Battery Removal: Dell Precision™ WorkStation 210 Systems
 |
WARNING: There is a danger of the new battery exploding if it is
incorrectly installed. Replace the battery only with the same or equivalent type
recommended by the manufacturer. Discard used batteries according to the manufacturer's
instructions. |
- If possible, enter the System Setup program and print the System Setup screens.
- Rotate the power supply up until it locks.
- Remove the system battery.
Carefully pry the system battery out of its socket with your fingers or
with a blunt, nonconducting object, such as a plastic screwdriver.
When you replace the system battery, orient the new battery with the "+"
facing up. Insert the battery into its socket and snap it into place.
|
