Jumpers: Fujitsu 3.2-GB 2.5-Inch Hard-Disk Drive (MHD2032AT)
Jumpers: Fujitsu 3.2-GB 2.5-Inch Hard-Disk Drive (MHA2032DT)
Power Supply Connector Pins
Master/Slave Jumper Settings
 = jumpered
 = unjumpered
 = Master/Slave
Jumper Block
 |
NOTE: Pins A and C should be open. |
| Master |
 (default) |
Only drive in single system
(device 0) |
| Slave |
 |
Slave drive in dual-drive
system (device 1) |
|
