Safety Instructions: ATI ALL-IN-WONDER® 9000 Low Profile User's Guide
Important Safety Instructions
Read Instructions - All the safety and operating instructions should be read before the product
is operated.
Retain Instructions - The safety and operating instructions should be retained for future
reference.
Heed Warnings - All warnings on the product and the operating instructions should be adhered to.
Compatibility - This option card is for use only with IBM AT or compatible UL Listed personal
computers that have Installation Instructions detailing user installation of card cage accessories.
Grounding - CAUTION: For Continued Protection Against Risk of Electric Shock and Fire, This Accessory
Should Be Installed Only In Products Equipped With A Three-wire Grounding Plug, A Plug Having a third
(Grounding) Pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet, contact your electrician to replace the obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.
All option card securement pins shall be completely tightened as to provide continuous bonding between
the option card and the PC chassis.
Outdoor Antenna Grounding - Since an outdoor antenna or cable system is connected to the product,
be sure that the antenna or cable system is grounded so as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to the
antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection of
grounding electrodes, and requirements for the grounding electrode.
Lightning - For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet, and disconnect the antenna
or cable system. This will prevent damage to the product due to lightning and power-line surges.
Power Lines - An outside antenna system should not be located in the vicinity of overhead power
lines or other light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from touching such power
lines or circuits, as contact with them may be fatal.
Note to CATV System Installer - This reminder is provided to call the CATV systems installer's
attention to Section 820-40 of the NEC, which provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.
