Connecting Displays: NVIDIA GeForce FX 5200

Attach your analog monitor (CRT) cable to the VGA (DB-15) output connector that is located on your NVIDIA GeForce FX 5200-based graphics card in your computer. The VGA output connector and pin assignments are listed below.
If you need additional installation information, refer to the user documentation provided with your analog monitor.

VGA Output Connector

Pin

Function

Pin

Function

Red

Green

Blue

Not connected

Ground (analog)

Red Return (ground)

Green Return (ground)

Blue Return (ground)

+5V (fused 250 mA)

Ground (sync return)

Not connected

SDA (DDC Data)

Horizontal Sync

Vertical Sync

SCL (DDC Clock)

DDC = Display Data Channel

Note: The DVI-I output connector on your NVIDIA GeForce FX 5200-based graphics card is only for use with a DVI-I flat panel cable.

Attach your DVI-I cable to the DVI-I output connector located on your graphics card. The connector pin assignments are shown below.
If you need additional installation information, refer to the user documentation provided with your flat panel display device.

DVI-I Output Connector Pin Assignments

Pin	Function	Pin	Function	Pin	Function
1 2 3 4 5 6 7 8	TMDS Data2- TMDS Data2+ Data2/4 Shield TMDS Data4- TMDS Data4+ DDC Clock DDC Data No Connect	9 10 11 12 13 14 15 16	TMDS Data1- TMDS Data1+ Data2/4 Shield TMDS Data3- TMDS Data3+ +5V Power Ground (for +5) Hot Plug Detect	17 18 19 20 21 22 23 24	TMDS Data0- TMDS Data0+ Data0/5 Shield TMDS Data5- TMDS Data5+ Clock Shield TMDS Clock+ TMDS Clock-

Attach your S-Video (TV-out) cable to the S-Video connector located on your NVIDIA GeForce FX-based graphics card. The connector pin assignments are shown below.
If you need additional installation information, refer to the user documentation provided with your TV.

Note: Your computer does not ship with an S-Video cable.

S-Video (TV) Connector

Pin

Function

GND, Ground

Y, Luminance

C, Chrominance