|
 | | | |
Modifying Application Profiles: Diamond Fire GL1 User's Guide
Back to Contents Page
Modifying Application Profiles: Diamond Fire GL1 User's Guide
- Select the Configuration dialog in the Display Properties window.
- Click the Add button in the Configuration Profiles section and enter the
new application for which you want to set the configuration parameters.
- To modify the configuration settings of a specific application, for example, HOOPS,
select the application from the list in the Configuration Profiles section and
click the Modify button.
- In the Settings section select or clear the following checkboxes according to
your requirements.
|
|
|
Wait for vertical retrace
Buffer swap 'synched' to vertical retrace. Enable this function for best picture
quality. If you disable ‘Wait for vertical retrace’ you may experience visual
artifacts such as tearing. However, this function may be disabled for performance
benchmarking. |
|
Overlay Planes
4-Bit double-buffered: Use 4 bit double-buffered overlay planes in the depth
buffers. The driver exports pixelformats with 4-bit double-buffered overlay planes for
OpenGL applications.
8-Bit single-buffered: Use 8 bits of each 32-bit frame buffer pixel as
single-buffered overlay planes. |
|
Force copy swap
Force blit copy from back to front buffer. |
|
|
- Click the Apply or OK button to enable your Configuration
settings.
Back to Contents Page
|
|
|
