Back to Contents Page

Wireless Sniffer Board

Dell™ XPS™ M1730 Service Manual

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: Handle components and cards by their edges, and avoid touching pins and contacts.

1. Follow the instructions in Before You Begin.
   
   
2. Remove any installed ExpressCards from the ExpressCard slot.
   
   
3. Remove the palm rest (see Palm Rest).
   
   
4. Disconnect the wireless sniffer board cable from the system board.
   
   
5. Remove the screw from the sniffer board and remove it from the computer base.
   
   

1

screw

Back to Contents Page