Back to Contents Page

S-Video Board

Dell™ XPS™ M1530 Service Manual

  Removing the S-Video Board

  Replacing the S-Video Board

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.

Removing the S-Video Board

1. Follow the procedures in Before You Begin.
   
   
2. Remove the system board (see Removing the System Board).
   
   
3. Remove the screw that secures the S-Video board to the system board.
   
   

1	system board	2	screw
3	S-Video board	4	USB connector
5	S-Video connector		SIM card slot

4. Detach the S-Video board from the system board connector.
   
   

Replacing the S-Video Board

1. Attach the S-Video board to the system board connector.
   
   
2. Replace the screw that secures the S-Video board to the system board connector.
   
   
3. Replace the system board (see Replacing the System Board).
   
   
4. Replace the wireless sniffer board (see Replacing the Wireless Sniffer Board).
   
   
5. Replace the ExpressCard reader (see Replacing the ExpressCard Reader).
   
   
6. Replace the optical drive (see Replacing the Optical Drive).
   
   
7. Replace the palm rest (see Replacing the Palm Rest).
   
   
8. Replace the keyboard (see Replacing the Keyboard).
   
   
9. Replace the hinge covers and center control cover (see Replacing the Hinge Covers and Center Control Cover).
   
   

Back to Contents Page