Back to Contents Page

Coin-Cell Battery

Dell™ XPS™ M1330 Service Manual

  Removing the Coin-Cell Battery

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.

Removing the Coin-Cell Battery

1. Follow the procedures in Before You Begin.
   
   
2. Turn the computer over.
   
   
3. Turn the computer over and loosen the three captive screws along with the M2.5 x 5-mm screw. Remove the module cover.
   
   

1	M2.5 x 5-mm screw	2	captive screws (3)
3	module cover

4. Disconnect the coin-cell battery cable from the system board.
   
   

1

coin-cell battery

2

cable connector

5. Slide the coin-cell battery from under the antenna cables and remove the battery from the computer.
   
   

Back to Contents Page