|
Removing the Computer Cover: Dell XPS 200 Service Manual
Back to Contents Page
Removing the Computer Cover
Dell™ XPS 200 Service Manual
|
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
|
- Follow the procedures in "Before You Begin".
|
|
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.
|
|
NOTICE: Ensure that sufficient space exists to support the removed cover—at least 30 cm (1 ft) of desk
top space.
|
|
|
NOTICE: Ensure that you are working on a level, protected surface to avoid scratching either the
computer or the surface on which it is resting.
|
- Lay your computer on its side with the computer cover facing up.
- Pull back the cover latch release on the top panel.
- Locate the three hinge tabs on the bottom edge of the computer.
- Grip the sides of the computer cover and pivot the cover up, using the bottom hinges as
leverage points.
- Release the cover from the hinge tabs and set it aside in a secure location.
Back to Contents Page
|
