Back to Contents Page

Optical Drive

Dell Precision™ M6400 Service Manual

  Removing the Optical Drive

  Replacing the Optical Drive

Removing the Optical Drive

CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

1. Follow the procedures in Before Working on Your Computer.
   
   
2. Turn your computer upside down.
   
   
3. Remove the M2.5 x 8-mm screw in the battery bay.
   
   
4. Use the notch by the screw to push the optical drive out enough to pull it out from the bay.
   
   

Replacing the Optical Drive

CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

NOTE: The security screw on the optical drive is optional and may not be installed on your computer.

1. Slide the optical drive into the media bay.
   
   
2. Replace the M2.5 x 8-mm screw.
   
   
3. Follow the procedures in After Working on Your Computer.
   
   

Back to Contents Page