|
Microprocessor Airflow Shroud � Dell Precision� 650 Computer: Dell
Precision Workstation 650 and Dell Precision Workstation 450 Service Manual
Back to Contents Page
Dell Precision� Workstation 650 and Dell Precision
Workstation 450 Service Manual
 Removing
the Microprocessor Airflow Shroud
Installing
the Microprocessor Airflow Shroud
 |
CAUTION: Before
you begin any of the procedures in this section, follow the safety
instructions in the System Information Guide. |
- Press down and back on the indentations at
the top corners of the shroud.
The top anchor tabs disengage from the anchor slots.
- Lift the airflow shroud out of the
computer.
|
1
|
airflow shroud
|
|
2
|
indentations (2)
|
|
3
|
bottom anchor tabs (2)
|
|
4
|
side anchor tabs (2)
|
|
5
|
top anchor tabs (2)
|
- Insert the bottom anchor tabs into the
anchor slots.
- Align and insert the side anchor tabs into
the anchor slots.
- Press the indentations until the top
anchor tabs on the shroud snap securely into place.
- Close the
computer cover.
 |
NOTICE: To connect
a network cable, first plug the cable into the network wall jack and then
plug it into the computer. |
- Connect your computer and devices to
electrical outlets, and turn them on.
Back to Contents Page
| 
