Manuals

Jumper Settings: Dell Precision Workstation 340 User's Guide

Back to Contents Page

Jumper Settings

Dell Precision™ Workstation 340 User's Guide

System Board Jumpers

NOTICE: Before changing a jumper setting, verify that the standby power light on the system board has turned off. Otherwise, damage to your computer or unpredictable results may occur. To locate this light, see "System Board Components."

To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated.

System-Board Jumper Settings

Jumper

Setting

Description

PSWD
(default)
Password features are enabled.

Password features are disabled.

CLR CM

(pins 1 and 2)
Normal setting—pins 1 and 2 are jumpered.

(pins 2 and 3)
CLR CM setting—pins 2 and 3 are jumpered. See "Reset Corrupted BIOS Settings."

jumpered unjumpered

NOTE: The CLR CM settings are also located on the system board next to the AGP card clip tab.

Back to Contents Page