Use a plastic scribe to push the battery release button through the hole in
the battery latch assembly.
NOTICE: The battery latch spring is not secured to the latch assembly and can be easily misplaced. When removing the battery latch assembly, place the spring in a secure location until the latch is ready to be reinstalled.
Remove battery latch assembly.
1
screw
2
battery latch assembly
3
spring
4
battery release button
NOTICE: Before you remove the battery release button, observe the orientation of the button to ensure proper installation when the button is replaced.
Replacing the Battery Latch Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: Ensure the battery latch assembly is properly oriented. The indent for the screw should face up when installing the assembly.
Ensure that the battery latch spring is properly mounted on the guide post
of the battery latch assembly.
Align the guide post on the battery latch assembly with the slot on the
base of the computer, then lower the latch assembly into place.
NOTICE: The battery release button is keyed to ensure proper. If you feel resistance, check the alignment of the release button.
Align the battery release button with the hole in the battery latch
assembly, then press the button into place.
