Coin-Cell Battery

Dell™ Vostro™ 1310 Service Manual

Removing the Coin-Cell Battery

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

Follow the procedures in Before Working on Your Computer.
Remove the hard drive (see Removing the Hard Drive).
Remove the WLAN card (see Removing a WLAN Card).
Remove the fan (see Removing the Fan).
Remove the hinge cover (see Removing the Hinge Cover).
Remove the keyboard (see Removing the Keyboard).
Remove the display assembly (see Removing the Display Assembly).
Remove the palm rest (see Removing the Palm Rest).
Disconnect the cable that secures the internal card with Bluetooth® wireless technology to the system board (see Removing the Card).
Remove the optical drive (see Removing the Optical Drive).
Remove the system board (see Removing the System Board Assembly).
Disconnect the coin-cell battery cable connector from the system board.
Lift the coin-cell battery from the system board.

1

coin-cell battery cable connector

2

coin-cell battery

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

NOTE: This procedure assumes that you have completed the removal procedure first.

Connect the coin-cell battery cable connector to the system board.
Position the coin-cell battery on the system board.
Replace the system board (see Replacing the System Board Assembly).
Replace the optical drive (see Replacing the Optical Drive).
Connect the cable that secures the internal card with Bluetooth wireless technology to the system board (see Replacing the Card).
Replace the palm rest (see Replacing the Palm Rest).
Replace the display assembly (see Replacing the Display Assembly).
Replace the keyboard (see Replacing the Keyboard).
Replace the hinge cover (see Replacing the Hinge Cover).
Replace the fan (see Replacing the Fan).
Replace the WLAN card (see Replacing a WLAN Card).
Replace the hard drive (see Replacing the Hard Drive).