Back to Contents Page

Internal Card With Bluetooth® Wireless Technology

Dell™ Vostro™ 1310 Service Manual

  Removing the Card

  Replacing the Card

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

If you ordered a card with Bluetooth wireless technology with your computer, the card is already installed.

Removing the Card

1. Follow the procedures in Before Working on Your Computer.
   
   
2. Remove the hard drive (see Removing the Hard Drive).
   
   
3. Remove the WLAN card (see Removing a WLAN Card).
   
   
4. Remove the fan (see Removing the Fan).
   
   
5. Remove the hinge cover (see Removing the Hinge Cover).
   
   
6. Remove the keyboard (see Removing the Keyboard).
   
   
7. Remove the display assembly (see Removing the Display Assembly).
   
   
8. Remove the palm rest (see Removing the Palm Rest).
   
   
9. Lift the card and cable and disconnect the card connector from the card.
   
   
10. Remove the card from the card compartment.
    
    

1

card cable connector

2

card

Replacing the Card

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

NOTE: This procedure assumes that you have completed the removal procedure first.

1. Connect the card cable connector to the card.
   
   
2. Replace the card in the card compartment.
   
   
3. Replace the palm rest (see Replacing the Palm Rest).
   
   
4. Replace the display assembly (see Replacing the Display Assembly).
   
   
5. Replace the keyboard (see Replacing the Keyboard).
   
   
6. Replace the hinge cover (see Replacing the Hinge Cover).
   
   
7. Replace the fan (see Replacing the Fan).
   
   
8. Replace the WLAN card (see Replacing a WLAN Card).
   
   
9. Replace the hard drive (see Replacing the Hard Drive).
   
   

Back to Contents Page