Back to Contents Page

I/O Panel

Dell™ Vostro™ 1220 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the I/O Panel

NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.

1. Follow the procedures in Before Working Inside Your Computer.
2. During installation or removal of ANY hardware, always ensure all data is backed up properly.
3. Remove the battery, hinge cover, keyboard, optical drive, LCD assembly, and palm rest from the system.
4. Disconnect the I/O panel cable.

5. Remove the screw securing the I/O panel board.

6. Remove the I/O panel board from the system.

Back to Contents Page