Manuals

Status Display Panel Removal: Dell™ Inspiron™ 3000 and 3200

1. Remove the hinge covers and connector cover as described in Keyboard Removal.
   See "Keyboard," found earlier in this chapter.
2. Remove the status display panel screw SD1.
3. Remove the status display panel.
   The status display panel has 2 connectors.
4. Disconnect the status display panel connector from connector JP5 on the main board.
5. Disconnect the speaker wiring harness from connector P3 on the status display panel.
6. Remove the status display panel from the palmrest assembly.

CAUTION: When reinstalling the connector cover, be sure the routing of the I/R cable is correct. If the wires of the I/R cable are not replaced correctly, with relation to the tabs of the connector cover, future removal of the cover may not be possible.

.