Manuals

13.3-Inch LCD Panel Removal: Dell™ Inspiron™ 3000 and 3200

1. Remove the front bezel.
2. Remove LCD panel screws LC5, LC6, LC7, and LC8.
3. Remove the LCD Panel.
   

   NOTE: Be careful when removing any part of the LCD cable harness.

   Lift up the LCD panel, and disconnect the LCD cable harness from connector J1 on the back of the LCD panel (for an IBM^� panel, hold the cable ground strap in place with one hand and peel back the EMI tape covering that holds the ground strap in place on the cable). Disconnect the LCD-to-inverter cable from the inverter-board connector CN2 on the side of the inverter board next to the back cover.
   

   CAUTION: When reinstalling an IBM LCD cable, slide the cable underneath the ground strap in place and reapply the EMI tape.

4. Remove grounding screw GS1 from the bracket.