Manuals

13.3-Inch LCD Front Bezel Removal: Dell™ Inspiron™ 3000 and 3200

1. Remove the LCD assembly.
2. Use a dental pick to pry the front-bezel screw covers out of the screw holes in the bezel.
3. Remove front-bezel screws F5 and F6.
4. Separate the front bezel from the back cover.
   With the bottom of the LCD assembly facing you (cables end), insert your fingertips between the LCD panel and the front bezel. Start in the center of the bezel and work out to the corners. With a peel-back-and-push motion, separate the front bezel from the hidden tabs on the back cover. Do not let your knuckles put pressure on the LCD panel in order to avoid microscopic fractures in the panel. Separate the bottom first and then proceed to each side, leaving the top of the assembly until last. When the bottom and sides have been released from the hidden tabs, proceed to the left corner. Lift the corner of the front bezel out to the side, until the hidden corner tab is freed. Repeat the procedure for the other corner, and lift up on the front bezel to release it from the back cover. Lift the back cover over the latch.

When replacing the front bezel, orient the bezel in its original position on the assembly and press firmly near each tab until the bezel snaps into place. Ensure that the LCD wiring harness and the inverter cable are routed correctly and are not pinched.