12.1-Inch Inverter Board Removal: Dell Inspiron 3000 and 3200
12.1-Inch LCD Inverter Board Removal: Dell™ Inspiron™ 3000 and 3200
- Remove the front bezel.
- Remove the LCD panel.
You may not want to remove this panel if you are replacing only the
inverter board.
- Disconnect the inverter cable from connector CN2 at the bottom of the inverter board and
remove the cable.
- Remove the inverter board from the back cover.
The inverter board is mounted on 2 plastic snaps. It is held in place by
these snaps and Kapton tape near the bottom of the board.
When replacing the inverter board, make sure you have the correct board. The inverter
board for a 12.1-inch IBM� LCD assembly is different from the inverter board
for a 12.1-inch Samsung LCD assembly.
|
