|
Utilities and Drivers for Microsoft Windows NT: Dell Inspiron 3700 System Reference
Back to Contents
Page
Utilities and Drivers for Microsoft�
Windows NT�: Dell
Inspiron 3700 System Reference
This section explains how to reinstall device drivers
and utilities on your Dell portable computer running the Microsoft Windows NT
4.0 operating system.
To install the system software, you need the following
items:
- Microsoft Windows NT 4.0 CD
- Microsoft Windows NT 4.0 Service Pack 5
CD
- System Software CD
- CD-ROM drive (installed)
- One formatted diskette
The following subsections describe the drivers
and utilities that are provided on the System Software CD.
 |
NOTE:
To install the drivers and utilities correctly, you must install them in
the order presented in this document. |
System utilities let you configure features such
as the save-to-disk suspend (S2D) partition. To copy the system utilities to
your hard-disk drive, perform the following steps.
 |
NOTE:
You can also run the system utilities directly from the System Software
CD. |
- Insert the System Software CD into the
CD-ROM drive.
- Double-click the My Computer icon.
- Double-click the CD-ROM drive icon.
- Double-click the Nt4 folder.
- Double-click the Suspend folder.
- Double-click the Axx folder, where xx
is the video driver revision.
- Copy each of the utilities on the System
Software CD to the c:\dell directory on your hard-disk drive. The
utilities have the following filenames: mks2d.exe, rms2d.exe,
asset.com, and readme.s2d.
For more information on copying files, see the documentation that came with
the operating system.
After you copy the utilities to your hard-disk
drive, you must restart your computer in the MS-DOS� mode to use the utilities.
See the readme.s2d file on the System
Software CD for more information on using the save-to-disk suspend (S2D)
partition utilities.
The video driver controls features such as video resolution
and the color palette.
 |
NOTE: If you
need to use extended video modes, check the documentation that came with
the application program to determine if the drivers are provided. If the
drivers are not provided, contact the software manufacturer to get the necessary
drivers. |
To install the video driver for Windows NT 4.0, perform the
following steps:
- Save your work in all
open application programs, because you will need to restart your computer
at the end of this procedure to complete the installation.
- Insert the System
Software CD into the CD-ROM drive.
- Double-click the My
Computer icon.
- Double-click the CD-ROM
drive icon.
- Double-click the Nt4 folder.
- Double-click the Video
folder.
- Double-click the Axx
folder, where xx is the video driver revision.
- Double-click the setup.exe
file.
- Follow the instructions
on your display.
- After the files are copied
to your hard-disk drive, click Finish to restart your computer.
After installing the video drivers and restarting
your computer, perform the following steps to set the display parameters:
- Click the Start button, point to Settings,
and then click Control Panel.
The Control Panel window appears.
- Double-click the Display icon.
The Display Properties window appears.
- Click the Settings tab.
- Change the Colors option from 256
colors to 1677216 colors.
- Set the Desktop Area area for your display
to 1024 x 768.
- Click Test.
- Press OK on the Testing Mode
window.
- Click Yes on the second Testing Mode
window to verify that the bitmap was displayed properly.
- Click OK.
Dell provides a power management utility that helps you
conserve battery power and view available power levels. To install the power management
utility, perform the following steps:
- Save your work in all open application programs,
because you will need to restart your computer at the end of this procedure
to complete the installation.
- Insert the System Software CD into
the CD-ROM drive.
- Double-click the My Computer icon.
- Double-click the CD-ROM drive icon.
- Double-click the Nt4 folder.
- Double-click the Powermgt
folder.
- Double-click the Axx
folder, where xx is the video driver revision.
- Double-click the setup.exe
file.
- Follow the instructions on your
display.
- After the files are copied to your hard-disk drive, click
Finish to restart your computer.
Dell provides a PC Card utility that allows you to view and
configure settings for your PC Card(s). To install the PC Card utility, perform the
following steps:
- Save your work in all open application
programs, because you will need to restart your computer at the end of this
procedure to complete the installation.
- Insert the System Software CD into the
CD-ROM drive.
- Double-click the My Computer icon.
- Double-click the CD-ROM drive icon.
- Double-click the Nt4 folder.
- Double-click the Pccard
folder.
- Double-click the Axx
folder, where xx is the video driver revision.
- Double-click the setup.exe
file.
- Follow the instructions on your
display.
- After the files are copied to your hard-disk drive, click
Finish to restart your computer.
Dell provides Softex Docking Services software that
contains support for the following features:
- Hot-docking and warm-undocking your portable computer from
the port replicator
- Hot-swapping devices such as diskette drives, hard-disk
drives, large-storage drives, DVD-ROM drives, and CD-ROM drives to and from your portable
computers media bay
- Compatibility with the Power Management Controller, which
allows you to suspend and resume the operation of your portable computer without affecting
your ability to use the port replicator
- Docking or undocking your portable computer while it is in
standby mode
- Docking services available in French, German, Spanish, and
Japanese
To install Softex Docking Services, perform the following
steps:
- Save your work in all open application
programs, because you will need to restart your computer at the end of this
procedure to complete the installation.
- Insert the System Software CD into the
CD-ROM drive.
- Double-click the My Computer icon.
- Double-click the CD-ROM drive icon.
- Double-click the Nt4 folder.
- Double-click the Docks
folder.
- Double-click the Axx
folder, where xx is the video driver revision.
- Double-click the setup.exe
file.
- Follow the instructions on your
display.
- After the files are copied to your hard-disk drive, click
Finish to restart your computer.
Dell provides audio drivers so that you can customize the
sound features of your computer.
To install the audio drivers, perform the following steps:
- Save your work in all open application programs,
because you will need to restart your computer at the end of this procedure
to complete the installation.
- Insert the System Software CD into the
CD-ROM drive.
- Double-click the My Computer icon.
- Double-click the CD-ROM drive icon.
- Double-click the Nt4 folder.
- Double-click the Audio
folder.
- Double-click the Axx
folder, where xx is the video driver revision.
- Double-click the setup.exe
file.
- Follow the instructions on your
display.
- After the files are copied to your hard-disk drive, click
Finish to restart your computer.
DualPoint integrated pointing device drivers allow you to
use and customize the integrated touch pad, the track stick, or an external mouse. To
install these drivers, perform the following steps:
- Save your work in all open application programs,
because you will need to restart your computer at the end of this procedure
to complete the installation.
-
Insert the System Software CD into the
CD-ROM drive.
-
Double-click the My Computer
icon.
-
Double-click the CD-ROM
drive icon.
- Double-click the Nt4 folder.
-
Double-click the Touchpad
folder.
-
Double-click the Axx
folder, where xx is the video driver revision.
-
Double-click the setup.exe
file.
-
Follow the instructions on your
display.
- After the files are copied to your hard-disk drive, click
Finish to restart your computer.
The Dell Inspiron system Help is available
on the System Software CD. You can also access it from Dells Support
Web site (http://support.dell.com).
 |
NOTE: You must
install Microsoft Internet Explorer 4.01 from the Microsoft Windows NT 4.0
Service Pack 5 CD prior to installing the system Help. |
Installing Help From the CD
To install the system Help from the System
Software CD, perform the following steps:
- Insert the CD into the CD-ROM drive.
- Double-click the My Computer icon, and
then double-click the CD-ROM drive icon.
- Double-click the Guide folder, and then
double-click the appropriate language folder for the version of the Help
you want to install.
- Right-click and hold 3700help and drag
it to the Windows desktop.
- Release the right mouse button.
- Left-click Copy Here.
- Double-click the 3700help icon to access
the system Help.
Downloading Help From the Support Web Site
To download the system Help
from http://support.dell.com, see "Online Documentation" for instructions.
Back to Contents Page
|