ZIF Connectors: Dell Inspiron 7000
ZIF Connectors: Dell™ Inspiron™ 7000
| NOTICE: ZIF connectors are fragile. To avoid breaking the
connectors, touch them carefully. Do not apply too much pressure to the movable part of
the connector when opening or closing it. |
Some of the computer’s interface connectors are ZIF
connectors. These connectors are not removable; they must be released to disconnect a
cable from them.
To disconnect a cable from a ZIF connector, follow these steps:
- Insert a small flat-blade screwdriver or dental pick under the
movable part of the connector.
For most ZIFs, carefully pry up one end of
the movable part of the connector and then the other end. Some ZIFs may need to be lifted
in the center.
- Pull up gently on the movable part of the connector until the
cable is released.
- Grasp the cable and pull it out of the connector.
To reconnect an interface cable to a ZIF connector, follow
these steps:
- Use the flat-blade screwdriver or dental pick to open the
movable part of the ZIF connector.
- Orient the end of the cable with the ZIF connector, and insert
the end of the cable into the connector.
- While holding the cable in place, close the ZIF connector.
To ensure
a firm connection, make sure the ZIF connector is completely closed.
|
