This procedure assumes that you have removed the display assembly from the
computer base. To remove the front bezel, follow these steps:
Use a dental pick to pry the rubber screw covers off of the bottom 2
screws and the rubber bumpers off of the top 2 screws.
Remove the (4) 6-mm screws from the front bezel.
Unsnap the front bezel from the back cover and remove it from the
assembly.
Carefully insert your fingers between the LCD panel and the bezel.
Roll the plastic up slightly to insert your fingers further in, and then lift upward to
free the snaps. Start at the middle bottom and then work around.
When replacing the bezel, ensure that the LCD wire harness is routed
correctly through the openings in the back cover and is not pinched.
Offers subject to change, not combinable with all other offers. Taxes, shipping, handling and other fees apply. U.S. Dell Home and Home Office new purchases only. Dell reserves the right to cancel orders arising from pricing or other errors.
