Back to Contents Page Glossary

Jumpers, Switches, Controls, and Indicators: Dell™ Inspiron™ 3500 Portable Computer System Reference

bullet.GIF (1107 bytes) Jumpers
bullet.GIF (1107 bytes) Switches
bullet.GIF (1107 bytes) Controls and Indicators

Jumpers

There are no jumpers on this system.


Switches

There are no configuration switches on this system.


Controls and Indicators

frntview.gif (22010 bytes)
 
1 LCD latch
2 Status lights (next to LCD latch)
3 Display
4 PC Card connectors (2)
5 Audio jacks (3)
6 AC adapter connector
7 Speaker
8 Battery release latch
9 Battery bay
10 Media bay
11 Touch pad buttons (2)
12 Touch pad
13 Keyboard
14 Power button
15 Connector cover
16 Microphone
17 Display close/suspend button
18 Status lights (3) (on keyboard)

Status Lights

Status Lights Above the Keyboard
1 Caps Lock status
2 Scroll Lock status
3 Num Lock status

 

Three status lights are located on the connector cover directly above the keyboard:

 

Status Lights Next to the Latch
1 System power status
2 Hard-disk drive activity status
3 Battery status

 

Three additional status lights are located on the front of the unit, to the right of the LCD latch:

Some devices located in the media bay (diskette drive, CD-ROM drive, DVD-ROM drive, Zip drive) also have an activity light indicating when the device is being accessed.

Battery Charge Gauge

 

Battery Charge Guage
1 Battery tester
2 Status lights (5)

 

The battery charge gauge on the bottom of the battery has five status lights that indicate how much battery charge remains. Each light indicates approximately 20% battery charge. Press the battery tester (a textured square on the back of the battery) to check the total battery charge.

Power Button

Under normal circumstances, you should only use the power button to turn on the computer or to resume operation from save-to-disk suspend  mode. To shut down the computer, click the Start button in the Microsoft® Windows® 98 operating system, and then click Shut Down. If the computer is "locked up"—that is, it does not respond to commands—press and hold down the power button for at least five seconds.

Display Close Button

When you close the display, this button activates Standby mode. Do not press this button.


Back to Contents Page Glossary