Back to Contents Page

I/O Panel

Dell™ OptiPlex™ L60 Service Manual

  Removing the I/O Panel

  Replacing the I/O Panel

Removing the I/O Panel

I/O Panel Removal

1	internal speaker cable
2	mounting screw
3	control-panel cable
4	front audio cable
5	I/O cable

1. Disconnect the control-panel cable from the control-panel connector on the I/O panel. Disconnect the I/O cable from the I/O panel.
   
   

Note the routing of the control-panel cable as you remove it from the computer so that you can replace it correctly.

2. Remove all cables that are connected to the I/O panel, such as the internal speaker cables.
   
   
3. From inside the chassis cover, remove the mounting screw that secures the I/O panel to the chassis.
   
   
4. Remove the I/O panel from the chassis.
   
   

Replacing the I/O Panel

To replace the I/O panel, reverse the previous procedure.

Back to Contents Page