Back to Contents Page

Badge

Dell™ OptiPlex™ GX260 Service Manual

  Removing the Badge

  Replacing the Badge

  Small Desktop and Small Mini-Tower Computers

Removing the Badge

Small Form-Factor Computer

1. Open the computer cover.
   
   
2. Using a flat-blade screwdriver, release the tabs from the inside of the computer, and remove the plastic computer cover from the metal component.
   
   

Computer Cover Removal

1	tabs (two on each side)

3. Remove the accent door by pressing the middle of the door while lifting away the sides of the door.
   
   
4. From inside the front bezel, push in on the two tabs on either side of the badge to release the badge.
   
   
5. Press the badge until it is freed.
   
   

Small Desktop and Small Mini-Tower Computers

1. Open the front USB door.
   
   
2. From inside the door, push in the two tabs on either side of the badge to release the badge.
   
   
3. Press the badge until it is freed.
   
   

Replacing the Badge

Small Form-Factor Computer

1. Replace the plastic computer cover. Make sure that the two metal hooks and tabs are securely in place.
   
   

Computer Cover Replacement

1	metal hooks (2)

To help replace the plastic computer cover, remove the accent door and front mask from the plastic computer cover:

1. Remove the front mask by releasing the tabs on the inside of the plastic computer cover.
   
   
2. Remove the accent door by pressing the middle of the door while lifting away the sides of the door.
   
   
3. After replacing the plastic computer cover, snap the front mask and accent door into place.
   
   

Front Mask and Accent Door Removal

1	accent door
2	front mask

2. Replace the badge by pressing it into place, ensuring that the two tabs click, securing it into position.
   
   

Small Desktop and Small Mini-Tower Computers

Replace the badge by pressing it into place, ensuring that the two tabs click, securing it into position.

Back to Contents Page