Small Form Factor Computer (Model # DCCY) Specifications
Microprocessor
Microprocessor type
AMD Phenom™ processors
NOTE: The AMD Phenom processor requires the 8-Mb NVRAM chip and is therefore available only on models that include the 8-Mb NVRAM chip. If your computer has the 8-Mb NVRAM chip and the AMD Phenom processor, the word enhanced appears in the title on the BIOS splash screen and the system setup program screens.
NOTE: The AMD Phenom processor requires the 8-Mb NVRAM chip and is therefore available only on models that include the 8-Mb NVRAM chip. If your computer has the 8-Mb NVRAM chip and the AMD Phenom processor, the word enhanced appears in the title on the BIOS splash screen and the system setup program screens.
NIC
integrated network interface with ASF 1.03 and 2.0 support as defined by DMTF
Capable of 10/100/1000 communication
Video
Type
nVidia integrated video (DirectX 9.0c Shader Model 3.0 Graphics Processing Unit), PCI Express x16 graphics card, or DVI graphics card.
PCI 2.3 PCI Express 1.0A SATA 1.0A and 2.0 USB 2.0
Bus speed
PCI: 133 MB/s
PCI Express x16: 40 GB/s bidirectional speed SATA: 1.5 Gbps and 3.0 Gbps USB: 480-Mbps high speed, 12-Mbps full speed, 1.2-Mbps low speed
Cards
low-profile, half-length
PCI
connectors
one
card size
low profile
connector size
124 pins
connector data width
(maximum)
32 bits
PCI Express
connectors
one x16
card size
low profile
power
25 W maximum
connector size
164 pins (x16)
connector data width (maximum)
16 PCI Express lanes (x16)
Drives
Externally accessible
one 3.5-inch drive one bay for slim optical drive
Internally accessible
one bay for a 1-inch-high hard drive
Connectors
External connectors:
Serial
9-pin connector; 16550C-compatible
Parallel
25-hole connector (bidirectional)
Video
15-hole VGA connector
Network adapter
RJ45 connector
Optional PS/2 with secondary serial port adapter
two 6-pin mini-DINs
NOTE: This option uses one of the PCI slots.
Optional DVI
36-pin connector
NOTE: This option uses one of the PCI slots.
USB
two front-panel and five back-panel USB 2.0–compliant connectors
Audio
two connectors for line-in and line-out; two front-panel connectors for headphones and microphone
System board connectors:
SATA
two 7-pin connectors
Floppy drive
38-pin connector
Serial
24-pin connector for optional second serial port card
Fan
two 5-pin connector fans
PCI 2.3
124-pin connector
PCIe-X16
164-pin connector
Internal USB
10-pin connector
Intrusion switch
3-pin connector
Speaker
5-pin connector
Memory modules
four 240-pin connectors
Power 12V
4-pin connector
Power
24-pin connector
Battery
2-pin socket
Front panel
40-pin connector
Key Combinations
<Ctrl><Alt><Del>
in Microsoft® Windows® XP and Windows Vista, brings up the Windows Security window; in MS-DOS® mode, restarts (reboots) the computer
<F2> or <Ctrl><Alt><Enter>
starts embedded system setup (during system start-up only)
<F12> or <Ctrl><Alt><F8>
displays a boot device menu that allows the user to enter a device for a single boot (during system start-up only) as well as options to run hard-drive and system diagnostics
Controls and Lights
Power control
front of chassis - push button
Power light (within the power button)
green light — Blinking green indicates a sleep mode; solid green indicates a power-on state.
amber light — Blinking amber indicates a problem with an installed device; solid amber indicates an internal power problem (see Power Problems).
Hard-drive access light
front panel - green
Link light
front panel - solid green light indicates network connection
Link integrity light (on integrated network adapter)
rear panel - green light for 10-Mb operation; orange light for 100-Mb operation; yellow light for a 1000-Mb (1-Gb) operation
