Back to Contents Page

Chassis Speaker

Dell™ OptiPlex™ 170L User's Guide

  Installing the Optional Chassis Speaker

  Removing the Chassis Speaker

Installing the Optional Chassis Speaker

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

1. Follow the procedures in "Before You Begin."
   
   
2. Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
   
   
3. Insert the four tabs on the speaker into four slots on the chassis.
   
   
4. Slide the speaker toward the hard drive until the speaker is seated securely.
   
   
5. Attach the cable to the connector on the I/O panel.
   
   

Desktop Computer

1	chassis slots (4)
2	speaker tabs (4)
3	chassis speaker

Minitower Computer

1	chassis slots (4)
2	speaker tabs (4)
3	chassis speaker
4	chassis speaker cable
5	chassis speaker connector

Removing the Chassis Speaker

1. Disconnect the cable from the system board.
   
   
2. Press the lever to unseat the speaker, slide the speaker toward the CD drive, and then remove it.
   
   

Desktop Computer

Minitower Computer

Back to Contents Page