Contents: Dell PowerVault MD3000i
Dell PowerVault MD3000i
| Getting Started Guide |
View |
Download |
| Hardware Owner's Manual |
View |
Download |
| MD3000i Support Matrix |
View |
Download |
| Dell PowerVault MD3000/MD3000i RAID Controller
Password Reset |
View |
Download |
| Upgrading Your Dell PowerVault MD3000i From
Simplex to Duplex Mode |
View |
Download |
| Dell PowerVault MD3000/MD3000i Array Tuning Best Practices |
View |
Download |
| Replacing a RAID Controller Module in a
Single-Controller MD3000i |
View |
Download |
| Dell MD Storage Array vCenter Plug-in User’s
Guide |
View |
Download |
Version-Specific Documents
Determining Your Firmware Version
To determine if your software is first generation or second generation, perform the following steps:
- Connect to the system using the Dell PowerVault MD Storage Manager.
- Select the Support tab.
- Click Storage Array Profile.
- Note the firmware version:
If the version displayed is 06.xx.xx.xx, the following
documents apply:
If the version displayed is 07.xx.xx.xx, the
following documents apply:
Last Updated: 5 October 2011
|
