Back to Contents Page

RJ-11 Modem Connector

Dell™ Latitude™ E6400 and E6400 ATG and
Mobile Workstation Precision™ M2400 Service Manual

  Removing the RJ-11 Modem Connector

  Replacing the RJ-11 Modem Connector

Removing the RJ-11 Modem Connector

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.

1. Follow the procedures in Before Working on Your Computer.
   
   
2. Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly).
   
   
3. Remove the heatsink assembly (see Removing the Processor Heatsink Assembly).
   
   
4. Remove the hinge covers (see Removing the Hinge Covers).
   
   
5. Remove the modular drive (see Removing the Modular Drive).
   
   
6. Remove the display assembly (see Removing the Display Assembly (E6400 and M2400) or Removing the Display Assembly (E6400 ATG)).
   
   
7. Remove the LED cover (see Removing the LED Cover).
   
   
8. Remove the keyboard (see Removing the Keyboard).
   
   
9. Remove the right speaker grill (see Removing the Right Speaker Grill/Fingerprint Reader Assembly).
   
   
10. Remove the palm rest assembly (Removing the Palm Rest Assembly).
    
    
11. Remove the modem (see Removing the Modem).
    
    
12. Lift the RJ-11 modem connector out of the base assembly.
    
    

1

RJ-11 modem connector

Replacing the RJ-11 Modem Connector

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.

1. Place the RJ-11 modem connector into the base assembly, aligning the guides on the connector sides with the base.
   
   
2. Replace the modem (see Replacing the Modem).
   
   
3. Replace the palm rest assembly (Replacing the Palm Rest Assembly).
   
   
4. Replace the right speaker grill (see Replacing the Right Speaker Grill/Fingerprint Reader Assembly).
   
   
5. Replace the keyboard (see Replacing the Keyboard).
   
   
6. Replace the LED cover (see Replacing the LED Cover).
   
   
7. Replace the display assembly (see Replacing the Display Assembly (E6400 and M2400) or Replacing the Display Assembly (E6400 ATG)).
   
   
8. Replace the modular drive (see Replacing the Modular Drive).
   
   
9. Replace the hinge covers (see Replacing the Hinge Covers).
   
   
10. Replace the heatsink assembly (see Replacing the Processor Heatsink Assembly).
    
    
11. Replace the bottom of the base assembly (see Replacing the Bottom of the Base Assembly).
    
    
12. Follow the procedures in After Working on Your Computer.
    
    

Back to Contents Page