|
Modular Drive: Dell Latitude E6400 and E6400 ATG and <br> Mobile Workstation Precision M2400 Service Manual
Back to Contents Page
Modular Drive
Dell™ Latitude™ E6400 and E6400 ATG and
Mobile Workstation Precision™ M2400 Service Manual
 Removing the Modular Drive
Replacing the Modular Drive
The modular drive supports either a second hard drive, an optical drive, or a an air bay for travel.
Removing the Modular Drive
|
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. |
|
NOTE: The security screw on the modular drive is optional and may not be installed on your computer. |
- Follow the procedures in Before Working on Your Computer.
- Turn your computer upside down.
- If your computer has a security screw for the modular drive, remove the
security screw.
- Push the release latch in to release it.
- Use the release latch to slide the drive out of the modular bay.
|
1
|
security screw
|
2
|
modular bay
|
|
3
|
modular drive
|
4
|
release latch
|
Replacing the Modular Drive
|
|
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. |
|
|
NOTE: The security screw on the modular drive is optional and may not be installed on your computer. |
- Slide the drive in the modular bay.
- If your computer has a security screw for the modular drive, replace the
security screw.
- Follow the procedures in After Working on Your Computer.
Back to Contents Page
|
