Back to Contents Page

Modem

Dell™ Latitude™ E6400 and E6400 ATG and
Mobile Workstation Precision™ M2400 Service Manual

  Removing the Modem

  Replacing the Modem

Removing the Modem

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.

1. Follow the procedures in Before Working on Your Computer.
   
   
2. Remove the LED cover (see Removing the LED Cover).
   
   
3. Remove the keyboard (Removing the Keyboard).
   
   
4. Remove the M2 x 3-mm screw from the modem.
   
   
5. Use the pull tab to remove the modem from the I/O card.
   
   
6. Disconnect the modem cable from the modem.
   
   

1	M2 x 3-mm screw	2	modem cable
3	modem

Replacing the Modem

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.

1. Connect the modem cable to the modem.
   
   
2. Use the screw hole on the modem to align it with the connector on the I/O card.
   
   
3. Press the area on the modem marked "Press Here" to connect the modem to the I/O card.
   
   
4. Replace the M2 x 3-mm screw to secure the modem to the I/O card.
   
   
5. Replace the keyboard (Replacing the Keyboard).
   
   
6. Replace the LED cover (see Replacing the LED Cover).
   
   
7. Follow the procedures in After Working on Your Computer.
   
   

Back to Contents Page