Back to Contents Page

Video Card Assembly

Dell™ Latitude™ D810 Service Manual


Removing the Video Card Assembly

CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
  1. Follow the instructions in "Preparing to Work Inside the Computer."

  2. Remove the display assembly.

  3. Remove the keyboard.

  4. Remove the palm rest.

  5. Loosen the four M2.5 corner screws (marked with a triangle on the thermal-cooling assembly) from the video card assembly. These screws connect the video-card thermal-cooling assembly to the system board.

1

M2.5 x 5-mm corner screws

2

video card assembly

  1. Lift the video card assembly straight up and out of the computer.

Back to Contents Page