Back to Contents Page

Speaker Assembly

Dell™ Latitude™ D810 Service Manual

  Removing the Speaker Assembly

Removing the Speaker Assembly

CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

1. Follow the instructions in "Preparing to Work Inside the Computer."
   
   
2. Remove the hard drive.
   
   
3. Remove the coin-cell battery.
   
   
4. Remove the center control cover.
   
   
5. Remove the display assembly.
   
   
6. Remove the keyboard.
   
   
7. Remove the palm rest.
   
   

NOTICE: Handle the speakers with care to avoid damaging them.

8. Remove the M2.5 x 5-mm screw from the speakers.
   
   
9. Disconnect the speaker cable from the system board.
   
   

1	speakers
2	M2.5 x 5-mm screw (1)
3	speaker-cable connector
4	computer base

When replacing the speaker assembly, follow the steps in reverse order.

Back to Contents Page