Manuals

Microprocessor Module: Dell Latitude D610 Service Manual

Back to Contents Page

Microprocessor Module

Dell™ Latitude™ D610 Service Manual

Removing the Microprocessor Module

Installing the Microprocessor Module

Removing the Microprocessor Module

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: Do not touch the processor die. Press and hold the microprocessor down on the substrate on which the die is mounted while turning the cam screw to prevent intermittent contact between the cam screw and microprocessor.

NOTICE: To avoid damage to the microprocessor, hold the screwdriver so that it is perpendicular to the microprocessor when turning the cam screw.

Follow the instructions in "Preparing to Work Inside the Computer."
Remove the center control cover (see "Removing the Center Control Cover").
Remove the keyboard (see "Removing the Keyboard").
Remove the display assembly (see "Removing the Display Assembly").
Remove the palm rest (see "Removing the Palm Rest").

NOTICE: To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the microprocessor thermal-cooling assembly. The oils in your skin reduce the heat transfer capability of the thermal pads.

Remove the microprocessor thermal-cooling assembly.

NOTICE: When removing the microprocessor module, pull the module straight up. Be careful not to bend the pins on the microprocessor module.

To loosen the ZIF socket, use a small flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until you cannot turn the screw any further.

1

microprocessor

2

ZIF-socket cam screw

3

ZIF socket

4

pin-1 corner

NOTE: The ZIF-socket cam screw secures the microprocessor to the system board. Take note of the arrow on the ZIF-socket cam screw.

NOTE: See Mini RSL for microprocessor part numbers.

Lift the microprocessor module from the system board.

Installing the Microprocessor Module

NOTICE: Ensure that the cam lock is in the fully open position before seating the microprocessor module. Seating the microprocessor module properly in the ZIF socket does not require force.

NOTICE: A microprocessor module that is not properly seated can result in an intermittent connection or permanent damage to the microprocessor and ZIF socket.

Align the pin-1 corner of the microprocessor module with the pin-1 corner of the ZIF socket, and insert the microprocessor module.

NOTE: The pin-1 corner of the microprocessor module has a triangle that aligns with the triangle on the pin-1 corner of the ZIF socket.

NOTICE: You must position the microprocessor module correctly in the ZIF socket to avoid permanent damage to the module and the socket.

When the microprocessor module is correctly seated, all four corners are aligned at the same height. If one or more corners of the module are higher than the others, the module is not seated correctly.

Tighten the ZIF socket by turning the cam screw clockwise until you cannot turn the screw any further to secure the microprocessor module to the system board.
Replace the other computer parts you removed earlier in this procedure.
Update the BIOS using a flash BIOS update program CD. For instructions on how to flash the BIOS, see "Flashing the BIOS."

Back to Contents Page

Oferta válida sólo para configuraciones aquí publicadas entre el 3 y el 9 de febrero de 2012 en www.dell.com. Precios en dólares estadounidenses que excluyen fletes, gastos e impuestos de importación o locales. Fletes e impuestos de venta serán incluidos en el precio final. Éstos son algunos ejemplos de configuraciones con precios promocionales. Aplican restricciones. Para más información visite www.dell.com El peso del producto varía según configuración. Para detalles de la garantía o servicio técnico ingrese en www.dell.com Dell no es responsable por cargos adicionales por uso de tarjeta o intereses, cargos por mora o penalidades por caso de retraso de acuerdo con su contrato con el banco. Disponibilidad del Microsoft Office 2011 en español varía por región. Microsoft Office Edición Básica incluye Word, Excel y Outlook. Celeron, Celeron Inside, Core Inside, Intel, logotipo Intel, Intel Atom, Intel Atom Inside, Intel Core, Intel Inside, logotipo Intel Inside, Intel Viiv, Intel vPro, Itanium, Itanium Inside, Pentium, Pentium Inside, Viiv Inside, vPro Inside, Xeon, y Xeon Inside son marcas registradas de Intel Corporation en Estados Unidos y en otros países. Si desea más información en cuanto a la clasificación del procesador Intel, consulte http://www.intel.com/es_LA/consumer/rating-partner.htm Dell no tiene derechos sobre otras marcas, nombres comerciales y productos de terceros aquí anunciados. Favor de proporcionar copia de identificación oficial del adquirente a la entrega del equipo. Dell no será responsable por aquellos errores tipográficos o fotográficos que se llegasen a presentar. 2011 Dell Inc. Todos los derechos reservados.