CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface.
Turn over the computer, loosen the captive screw from the modem cover, and lift the cover
away from the computer.
1
captive screw
2
modem cover
Disconnect the coin-cell battery cable connector from the battery connector on the system
board, and slide the coin-cell battery out of the securing sleeve.
1
coin-cell battery
2
battery connector on system board
3
coin-cell battery cable connector
4
securing sleeve
Installing the Coin-Cell Battery
Connect the coin-cell battery cable connector to the battery connector on the system board.