CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal
housing of the hard drive.
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
NOTICE: To prevent data loss, turn off your computer before removing the hard drive. Do not remove the hard
drive while the computer is on, in standby mode, or in hibernate mode.
NOTICE: Hard drives are extremely fragile; even a slight bump can damage the drive.
NOTE: Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell.
Turn the computer upside-down and remove the two M3 x 5-mm screws.
1
M3 x 5-mm screws (2)
2
hard drive
NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging. See "Protecting
Against Electrostatic Discharge" in your Product Information Guide.
Slide the hard drive out of the computer.
Replacing the Hard Drive
NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the
connector.
Slide the drive into the bay until it is fully seated.
Replace and tighten the screws.
If you have installed a replacement hard drive, reinstall the Microsoft® Windows® operating system.
For instructions, see "Restoring Your Operating System" in the User's Guide.
Reinstall drivers on the new hard drive. For instructions, see "Reinstalling Drivers and Utilities" in the
User's Guide.
Returning a Hard Drive to Dell
Return your old hard drive to Dell in its original or comparable foam packaging. Otherwise, the hard drive may be damaged in transit.
