Back to Contents Page

Fan

Dell™ Latitude™ C840 Service Manual

NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer.

1	fan cables
2	M2 x 4-mm screws (3)

Removing the Fan

1. Follow the instructions in "Preparing to Work Inside the Computer."
   
   
2. Remove the system board.
   
   
3. Remove the three M2 x 4-mm screws from the fan.
   
   
4. Disconnect the two fan cables from the system board.
   
   
5. Pull the fan away from the back-panel bracket.
   
   

NOTICE: When reconnecting the fan cables, connect the shorter cable to the connector closest to the fan. Route both cables so that they will not be pinched by the microprocessor thermal-cooling assembly.

Back to Contents Page