Back to Contents Page

Battery and Module Bay Latches

Dell™ Latitude™ C610/C510 Service Manual

  Removing the Battery and Module Bay Latches

  Replacing the Battery and Module Bay Latches

Removing the Battery and Module Bay Latches

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.

1. Remove the hard drive.
   
   
2. Remove the keyboard.
   
   
3. Remove the display assembly.
   
   
4. Remove the palm rest.
   
   
5. Remove the system board.
   
   
6. Remove the latch button by using a plastic scribe to push on the snap tabs until the latch button is released from the bottom case.
   
   

To prevent the latch assembly from coming loose, apply pressure to the latch and spring while removing the latch button. If the latch assembly does come loose from the case:

1. Slide the spring onto the slider on the latch, and reinstall the latch into the holding features on the inside of the bottom case.
   
   
2. Ensure that the slider is inserted into the hole, that the side of the latch with the two bumps is facing the back of the case, and that the side with the wear rib is facing the front of the case.
   
   

NOTE: The latch will not function properly if the slider is oriented incorrectly.

Battery and Module Bay Latches

1	bumps (2 per latch)	5	latch buttons (2)
2	slider	6	snap tabs (2 per latch button)
3	spring	7	wear rib
4	bottom case

Replacing the Battery and Module Bay Latches

1. Snap in the new latch button from behind the bottom case, making certain that the snap tabs are fully engaged in the latch.
   
   

To prevent the latch assembly from coming loose, apply pressure to the latch and spring while replacing the latch button.

2. Ensure that the newly installed latch moves smoothly and freely when pushed and released.
   
   

Back to Contents Page