Back to Contents Page

Speakers

Dell™ Inspiron™ 9200

  Removing the Speakers

  Replacing the Speakers

Removing the Speakers

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

1. Follow the instructions in "Before Working Inside Your Computer."
   
   
2. Remove the hinge cover.
   
   
3. Remove the keyboard.
   
   
4. Remove the display assembly.
   
   
5. Remove the palm rest.
   
   

NOTICE: Handle the speakers with care to avoid damaging them.

6. Remove the four M2.5 x 6-mm screws from the speakers (two on each speaker).
   
   
7. Gently remove the speakers.
   
   
8. Disconnect the speaker connector from the system board connector.
   
   

1	M2.5 x 6-mm screws (4)
2	speakers
3	speaker connector

Replacing the Speakers

1. Connect the speaker connector to the system board connector.
   
   
2. Gently align the speakers on the speaker connector.
   
   
3. Replace the four M2.5 x 6-mm screws to secure the speakers in place (two on each speaker).
   
   

Back to Contents Page