Back to Contents Page

Internal Card With Bluetooth® Wireless Technology

Dell™ Inspiron™ 910 Service Manual

  Removing the Card

  Replacing the Card

CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.

Removing the Card

1. Follow the instructions in Before You Begin.
   
   
2. Remove the module cover (see Removing the Module Cover).
   
   
3. Remove the keyboard (see Removing the Keyboard).
   
   
4. Remove the palm rest (see Removing the Palm Rest).
   
   
5. Turn the palm rest over.
   
   

1	screw (2)	2	internal card with Bluetooth wireless technology
3	cable

6. Remove the two screws that secure the card to the palm rest.
   
   
7. Lift the card out of the palm rest.
   
   

Replacing the Card

1. Insert card into the slot and tighten the two screws.
   
   
2. Turn the palm rest over.
   
   
3. Replace the palm rest (see Replacing the Palm Rest).
   
   
4. Replace the keyboard (see Replacing the Keyboard).
   
   
5. Replace the module cover (see Replacing the Module Cover).
   
   
6. Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position.
   
   

Back to Contents Page