See Specifications for information on supported ExpressCards.
NOTE: An ExpressCard is not a bootable device.
ExpressCard Blanks
Your computer shipped with a plastic blank installed in the ExpressCard slot. Blanks protect unused slots from dust and other particles. Save the blank for use when no ExpressCard is installed in the slot; blanks from other computers may not fit your computer. To remove the blank, see Removing an ExpressCard or Blank.
Installing an ExpressCard
You can install an ExpressCard in the computer while the computer is running. The computer automatically detects the card.
ExpressCards are generally marked with a symbol (such as a triangle or an arrow) or a label to indicate which end to insert into the slot. The cards are keyed to prevent incorrect insertion. If card orientation is not clear, see the documentation that came with the card.
NOTE: The ExpressCard slot does NOT support PC cards. See the illustration below to view supported cards.
1
supported card types (Express Cards)
2
unsupported card type (PCMCIA)
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
To install an ExpressCard:
Hold the card with the top side of the card facing up. The latch may need to be in the "in" position
before you insert the card.
Slide the card into the slot until the card is completely seated in its connector.
If you encounter too much resistance, do not force the card. Check the card orientation and try again.
1
ExpressCard
The computer recognizes the ExpressCard and automatically loads the appropriate device driver. If the configuration program tells you to load the manufacturer's drivers, use the floppy disk or CD that came with the ExpressCard.
Removing an ExpressCard or Blank
NOTICE: Use the ExpressCard configuration utility (click the icon in the taskbar) to select a card and stop it from functioning before you remove it from the computer. If you do not stop the card in the configuration utility, you could lose data.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
Press the latch and remove the card or blank. For some latches, you must press the latch twice: once to pop the latch out, and then a second time to pop the card out.
Save a blank to use when no ExpressCard is installed in a slot. Blanks protect unused slots from dust and other particles.
1
release button
2
ExpressCard
Media Memory Card Types
The 5-in-1 media memory card reader provides a fast and convenient way to view and share digital photos, music, and videos stored on a memory card.
NOTE: A media memory card is not a bootable device.
The 5-in-1 media memory card reader reads the following media memory cards:
Secure Digital (SD) card/SDIO
MultiMediaCard (MMC)
Memory Stick
Memory Stick PRO
xD-Picture Card
Media Memory Card Blanks
Your computer shipped with a plastic blank installed in the 5-in-1 media memory card slot. Blanks protect unused slots from dust and other particles. Save the blank for use when no card is installed in the slot; blanks from other computers may not fit your computer.
You can install a media memory card in the computer while the computer is running. The computer automatically detects the card.
Media memory cards are generally marked with a symbol (such as a triangle or an arrow) or a label to indicate which end to insert into the slot. The cards are keyed to prevent incorrect insertion. If card orientation is not clear, see the documentation that came with the card.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
To install a media memory card:
Hold the card with the top side of the card facing up.
Slide the card into the slot until the card is completely seated in its connector.
If you encounter too much resistance, do not force the card. Check the card orientation and try again.
1
5-in-1 media memory card slot
2
media memory card
The computer recognizes the media memory card and automatically loads the appropriate device driver. If the configuration program tells you to load the manufacturer's drivers, use the CD that came with the media memory card, if applicable.
Removing a Media Memory Card or Blank
NOTICE: Use the media memory card configuration utility (click the icon in the taskbar) to select a card and stop it from functioning before you remove it from the computer. If you do not stop the card in the configuration utility, you could lose data.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
Press the card in to release and remove the card or blank.
Save the blank to use when no media memory card is installed in the slot. Blanks protect unused slots from dust and other particles.
