CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as the back panel) on the computer.
Pull the connector of the PC Card with Bluetooth wireless technology out of the system
board connector.
Pull the cable to remove the PC Card with Bluetooth wireless technology from the computer.
NOTICE: When replacing the PC Card with Bluetooth wireless technology, ensure that the cable of the
PC Card with Bluetooth wireless technology is routed correctly so that you do not damage the cable
when you install the hard drive.
1
PC Card with Bluetooth wireless technology
2
system board connector
3
connector of PC Card with Bluetooth wireless technology
4
cable of PC Card with Bluetooth wireless technology
To replace a connector of the PC Card with Bluetooth wireless technology:
Insert the PC Card with Bluetooth wireless technology.