Manuals

Manuals
A Tour of Your Computer: Dell Inspiron 4100

Back to Contents Page

A Tour of Your Computer

Dell™ Inspiron™ 4100

  Front View

  Left Side View

  Right Side View

  Back View

  Bottom View



Front View

CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Doing so can damage the computer or cause a fire.

1

display latch

8

display latch button

2

display

9

battery bay

3

keyboard status lights

10

touch pad/track stick buttons

4

microphone

11

keyboard

5

device status lights

12

track stick

6

touch pad

13

power button

7

module bay

14

AccessDirect button

Display Latch

This latch keeps the display closed.

Display

The computer has a color LCD.

Keyboard Status Lights

The green lights located above the keyboard indicate the following:

 

Keyboard Status Lights

Turns on when the numeric keypad is enabled

Turns on when the uppercase letter function is enabled

Turns on when the scroll lock function is enabled

Microphone

Record audio with the internal microphone.

Device Status Lights

  • The light turns on when the computer is turned on.

  • The light turns on when the computer reads or writes data.

  • The light turns on steadily or blinks when the computer is in a power management mode. It also blinks to indicate battery charge status.

If the computer is connected to an electrical outlet, the light operates as follows:

    • Flashing green: The battery is fully charged.

    • Solid green: The battery is charging.

If the computer is running on a battery, the light operates as follows:

    • Off: The battery is adequately charged.

    • Flashing orange: The battery charge is low.

    • Solid orange: The battery charge is critically low.

NOTICE: To avoid data loss, never turn off the computer while the light is flashing.

Touch Pad

Use the touch pad and touch pad buttons as you would use a mouse.

Module Bay

You can install devices such as a CD drive, a DVD drive, a CD-RW drive, a second hard drive, a second battery, or a Dell TravelLite™ travel module in the module bay. For more information, see "About the Module Bay" in the Solutions Guide.

Display Latch Button

Press this button to release the display latch and open the display.

Battery Bay

When a battery is installed, you can use the computer without connecting it to an electrical outlet.

Touch Pad/Track Stick Buttons

These buttons correspond to the left and right buttons on a standard mouse.

Keyboard

The keyboard includes a numeric keypad as well as the Microsoft® Windows® logo key, .

Track Stick

Use the track stick and track stick buttons as you would use a mouse.

Power Button

Press the power button to turn on the computer or to exit standby mode.

HINT: To turn off your computer, perform a Windows shutdown.

If the computer stops responding, press and hold the power button until the computer turns off completely (which may take several seconds).

Dell™ AccessDirect™ Button

This button allows you to launch a frequently used program, such as your default Internet browser.


Left Side View

1

PC Card slot

3

security cable slot

2

hard drive

4

speaker (one of two)

PC Card Slot

The PC Card slot has two connectors that support various types of PC Cards (also referred to as PCMCIA cards), including modems and network adapters.

Hard Drive

The hard drive reads and writes data on a hard disk.

Security Cable Slot

This slot allows you to attach a commercially available antitheft device to the computer. Instructions for installing antitheft devices are usually included with the device.

NOTICE: Before you buy an antitheft device, ensure that it will work with the security cable slot.

Speakers

Press the volume control keyboard shortcuts to adjust the volume of the integrated speakers. If no sound comes from the speakers, press and adjust the volume.


Right Side View

CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Doing so can damage the computer or cause a fire.

1

speaker (one of two)

5

network connector

2

infrared sensor

6

S-video TV-out connector

3

audio connectors

7

air vent

4

modem connector

 

 

Infrared Sensor

The infrared sensor lets you transfer files from your computer to another infrared-compatible device without using cable connections.

Audio Connectors

Attach headphones or speakers to the connector.

Attach a microphone to the connector.

Modem Connector

To use your computer's internal modem, connect the telephone cable to the modem connector.

For information on using the modem, see the online modem documentation supplied with your computer.

Network Connector

To use your computer's integrated network adapter, use this connector to connect the computer to a network.

NOTICE: The network connector is slightly larger than the modem connector. Do not plug a telephone cable into the network connector.

For information on using the network adapter, see the online network adapter documentation supplied with your computer.

S-Video TV-Out Connector

Use this connector to attach your computer to a television.

Air Vent

HINT: The computer turns on the fans only when the computer gets hot. They may run most of the time or very seldom, depending on your use of the computer. Because the fans spin at a high rate of speed, they may make a noise. This noise is normal and does not indicate a problem with the fans or the computer.

The computer uses an internal fan to create airflow through the vents, which prevents the computer from overheating.

CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Doing so can damage the computer or cause a fire.

Back View

NOTICE: To avoid damaging the computer, wait 5 seconds after turning off the computer before you disconnect an external device.
HINT: The computer turns on the fans only when the computer gets hot. The fans may make a noise, which is normal and does not indicate a problem with the fans or the computer.
CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Doing so can damage the computer or cause a fire.

1

air intake

6

PS/2 connector

2

serial connector

7

USB connector

3

parallel connector

8

video monitor connector

4

docking connector

9

AC adapter connector

5

air vent

 

 

Serial Connector

Use this connector to attach serial devices, such as a mouse or a handheld device.

Parallel Connector

Use this connector to attach a parallel device, such as a printer. You can also attach a floppy drive to this connector with the optional parallel connector cable.

Docking Connector

HINT: Docking devices may not be available in all countries.

Use this connector to attach the optional docking device, also called an advanced port replicator (APR). A docking device, or APR, allows you to easily use external devices with your computer, such as an external keyboard, mouse, or monitor.

See the documentation that came with your docking device for additional information.

PS/2 Connector

HINT: You can use the integrated keyboard and an external keyboard at the same time. When you attach a keyboard or numeric keypad, the integrated numeric keypad is automatically disabled.

Use this connector to attach PS/2-compatible devices, such as a mouse, keyboard, or external numeric keypad.

Shut down the computer before attaching or removing a PS/2-compatible device. If the device does not work, install the device drivers from the floppy disk or CD that came with the device, and restart the computer.

On an external keyboard, the key acts the same way as the  key on the computer's keyboard (if the External Hot Key option is enabled in the system setup program).

USB Connector

Use this connector to attach USB devices, such as a mouse, keyboard, or printer.

Video Monitor Connector

Use this connector to attach an external monitor.

AC Adapter Connector

This connector attaches an AC adapter to the computer.

The AC adapter converts AC power to the DC power required by the computer. You can connect the AC adapter with your computer turned either on or off.

CAUTION: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage.
NOTICE: When you disconnect the AC adapter from the computer, grasp the adapter cable connector, not the cable itself, and pull firmly but gently to avoid damaging the cable.

Bottom View

NOTICE: To avoid damaging the computer, wait 5 seconds after turning off the computer before you disconnect an external device.
CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Doing so can damage the computer or cause a fire.

1

air intake

4

memory module and Mini PCI card

2

module release latch

5

battery release latch

3

docking device latch

 

 

Module Release Latch

Press the latch to remove a device in the module bay.

Docking Device Latch

This latch connects the computer to an optional docking device.

Memory Module and Mini PCI Card

For instructions on removing and installing memory modules and the optional Mini PCI card, see "Replacing Parts" in the Solutions Guide.

Battery Release Latch

Press the latch to remove a battery from the battery bay.


Back to Contents Page

 

 

 

Copyright 1999-2012 Dell Inc.
Site Terms of Use | Unresolved Issues | Terms and Conditions of Sale | Privacy Partnerships | About Dell | Contact Us | Feedback

snWEB9