Manuals

Processor Thermal-Cooling Assembly: Dell Vostro 1700 and Inspiron 1720/1721 Service Manual

Processor Thermal-Cooling Assembly

Dell™ Vostro™ 1700 and Inspiron™ 1720/1721 Service Manual

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

Follow the instructions in Before You Begin.
Remove the optical drive (see Removing the Optical Drive).
Remove the hard drive (see Removing a Hard Drive).
Remove the hinge cover (see Removing the Hinge Cover).
Remove the keyboard (see Removing the Keyboard).
Remove the display assembly (see Removing the Display Assembly).
Remove the internal card with Bluetooth wireless technology, if installed (see Removing the Bluetooth Card).
Remove the palm rest (see Removing the Palm Rest).
In sequential order, loosen the four captive screws that secure the processor thermal-cooling assembly to the system board, then carefully lift the processor thermal-cooling assembly out of the computer.


1	processor thermal-cooling assembly	2	captive screws (4)

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

Align the four captive screws on the processor thermal-cooling assembly with the screw holes on the system board.
In sequential order, tighten the four captive screws to secure the processor thermal-cooling assembly to the system board.
Replace the palm rest (see Replacing the Palm Rest).
Replace the internal card with Bluetooth wireless technology, if installed (see Replacing the Bluetooth Card).
Replace the display assembly (see Replacing the Display Assembly).
Replace the keyboard (see Replacing the Keyboard).
Replace the hinge cover (see Replacing the Hinge Cover).
Replace the hard drive (see Replacing a Hard Drive).
Replace the optical drive (see Replacing the Optical Drive).